MDP 160 Performance Drift Brushless ESC

TheMDP 160 Flow Edition fromMaclan is a high-performance ESC specifically developed forcompetitive RC drift, with a focus on chassis integration, electrical stability, and ease of setup.

Designed for demanding drivers, it features an optimized architecture with13AWG pre-soldered 90° wiring, ideal for modern rear-motor drift setups, allowing for a clean installation and perfectly managed cable routing.

The system directly integrates ahigh-performance Flow Capacitor, ensuring stable power delivery, limiting voltage drop, and improving consistency in motor behavior, especially during boost/turbo phases.

Preconfigured with10.5T and 13.5T motor profiles, validated by engineers, it provides a solid base that is immediately usable, while still allowing you to fine-tune the settings to match your driving style.

• Brand:Maclan
• Model:MDP 160 Flow Edition
• Type:High-performance brushless drift ESC
• Wiring:Pre-soldered 13AWG (90° angle)
• Optimized forrear motor drift chassis
• High-performance capacitorIntegrated Flow
• Stable power delivery and reduced losses
• Pre-installed profiles:10.5T / 13.5T
• Advanced settings (boost / turbo / throttle)
• Fan included for cooling

• 1 × ESCMDP 160 Flow Edition
• 1 × ESC switch (MCL4242)
• 1 × 20 cm receiver cable (MCL4243)
• 1 × USB Type-C cable (MCL4240)
• 1 × fan (MCL4246)
• 1 × sticker
• Manual via QR code

The MDP 160 excels intorque management andsmoothness at angle. The factory profiles make it easy to get started, while the advanced settings (PWM, boost/turbo, RPM limiter) allow for very fine tuning to optimizetraction, transitions andconsistency on low-grip tires inRC drift.

Processor: Ultra-fast 32-bit processor with 5-stage pipeline

Scale: 1/10 Drift
Mode: Sensored
Continuous current: 160 A
Power supply: 2S Li-Po
Input wires: Black - 13 AWG - 200 mm x 2
Output wires: Black - 13 AWG - 200 mm x 2
Fan: High-voltage turbo fan 30 x 30 x 10 mm

Net weight: 45 g (without wires or capacitor)

Dimensions: 38 x 30 x 19 mm (without fan)

Warranty: This product is covered by a limited 30-day express warranty against manufacturing defects. Normal wear parts (rotor, fan, wires, etc.) are not covered.